Tools Portable Hydraulic Press Swager - by Johnson
Swaging range: 1/8" - 3/16" Dimensions: L 7" W 5 1/2" H 13" Shipping Weight: 50 lbs

Made in USA

Johnson's New Portable Hydraulic Press Swager is a true hydraulic press. This swager presses the fittings onto the cable. All that is required to run this swager is 100 psi of compressed air. The air is coupled to an air over hydraulic foot switch. At 50 lbs. this swager is very portable. An electric over hydraulic pump is also available for 110v. Made in USA. Not rated for mil-spec fittings.

Locoloc(R) Manual Bench Swager - Type II
Swaging range: 1/16" - 3/8" Dimensions: L 12" W 9" H 12" Shipping Weight: 250 lbs

Cal l info for mo rma r tion e .

Made in USA Makes Mil-Spec Swages

WireTeknik TM Roller Swagers
Made in Sweden Makes Mil Spec Swages NOTE: Cannot swage Smooth Line turnbuckles or 1/8" Terminator Turnbuckles. Adapter needed for deck toggles.

A100
Swaging range: 1/16" - 3/16" Dimensions: L 19 3/4" W 11 3/4" H 4" Shipping Weight: 50 lbs (A200 Shown)

A200
Swaging range: 1/16" - 5/16" Dimensions: L 17" W 11" H 4 3/4" Shipping Weight: 100 lbs

A250
Swaging range: 3/32" - 1/2" Dimensions: L 37" W 15 3/8" H 6 9/32" Shipping Weight: 150 lbs

30

Johnson Architectural * Tel 800.874.7455 * Fax 860.873.8589 * www.csjohnson.com