Turnbuckles
Classic Jaw Turnbuckle
4-1/2"
OPEN CLOSED
The Classic Jaw and Swage Turnbuckle is an excellent choice for a wide variety of applications. A clevis pin in the jaw attaches to eyes, tabs or in a channel. Can be used in straight run or at an angle. Larger sizes available. Please see page 29 in Marine Catalog.
Also available in "Shortie" size, 3" long body with 2" of adjustment.
Jaw Attachment Tab
W D H E
Weld this edge to corner bracket
Best if used with Toggle Jaw...
L
D
(Hole Dia.)
Can also use Security Bolt (See pg. 26)
For Pin
(see pg. 26)
E 5/16" 3/8" 1/2"
L
H
W 1/4" 5/16" 3/8"
(Dist. from Edge) (Length) (Min. Height) (Stock Width)
Complete Cable Assembly (Example)
1/4" 5/16" 3/8"
9/32" 11/32" 25/64"
3/4" 1" 1-1/4" 1-1/2" 1-1/4" 1-1/2"
Machine Swage
CAT. NO. 19-314 19-316 19-318-7* 19-308 WIRE SIZE 1/8" 3/16" 1/4" 1/4" THREAD SIZE 1/4" 1/4" 5/16" 3/8" OPEN 11-1/4" 11-1/4" 12-3/4" 14-1/4" CLOSED 8-1/4" 8-1/4" 9" 10"
Hand Crimp
CAT. NO. 26-412 27-412 WIRE SIZE 1/8" 3/16" THREAD SIZE 1/4" 1/4" OPEN 11-5/8" 11-5/8" CLOSED 8-3/4" 8-3/4"
Johnson Hand Crimp Tool must be used to attach fittings to cable. See page 31.
*swage with 7/32" die
Classic Deck Toggle Turnbuckle
OPEN CLOSED
4-1/2"
Our Classic Deck Toggle and Swage Turnbuckle can be mounted to any flat surface and is held in place by two tabs suitable for through bolting. The best feature of the deck toggle is it can articulate 140 degrees.
Also available in "Shortie" size, 3" long body with 2" of adjustment.
Deck Toggle Attachment
*9/32" or 11/32" Dia.
15/ " 16
or 1 / "
1 2
Best if used with Deck Terminal... Complete Cable Assembly (Example)
(see pg. 26)
Deck Toggle Outline
11
* 932" for 18"& 316" cable. 32" for 14" cable.
1516" for 18"& 316" cable. 112" for 14" cable.
Flat Surface
Machine Swage
CAT. NO. 19-314-1T 19-316-1T 19-318-1T* WIRE SIZE 1/8" 3/16" 1/4" THREAD SIZE 1/4" 1/4" 5/16" OPEN 10-3/4" 11-1/4" 12" CLOSED 7-3/4" 8-1/4" 9"
Hand Crimp
CAT. NO. 26-412-1T 27-412-1T WIRE SIZE 1/8" 3/16" THREAD SIZE 1/4" 1/4" OPEN 11-1/2"" 11-1/2"" CLOSED 8-1/2" 8-1/2"
*swage with 7/32" die
Johnson Hand Crimp Tool must be used to attach fittings to cable. See page 31.
18
Johnson Architectural * Tel 800.874.7455 * Fax 860.873.8589 * www.csjohnson.com
These fittings are not for lifting, hanging or other high load applications. See Marine Catalog for Rigging Hardware.
Classic Ball End Turnbuckle
4-1/2"
OPEN CLOSED
The Classic Ball End and Swage Turnbuckle is made to accept the angles of stairways. The Ball End allows the turnbuckle to integrate itself to your desired angle. The ball allows this turnbuckle to gimbal in its mount. Note: 5/32" cable size available
Ball End Attachment
Width 9/32" or *11/32" * for 1/4" wire Hole X
Best if used with Ball End Terminal...
Drill mounting holes at true angles or with slots. SLOT LENGTH
THICKNESS
PLATE
(see pg. 26)
1/4"
3/8"
1/2"
Complete Cable Assembly (Example)
X
1/2" 19/32" 11/16"
Machine Swage
CAT. NO. 19-314-10B 19-316-10B 19-308-7B* WIRE SIZE 1/8" 3/16" 1/4" THREAD SIZE 1/4" 1/4" 5/16" OPEN 11-1/4" 11-1/4" 14-1/8" CLOSED 8-1/4" 8-1/4" 10-1/4"
Hand Crimp
CAT. NO. 26-412-10B 27-412-10B WIRE SIZE 1/8" 3/16" THREAD SIZE 1/4" 1/4" OPEN 11-11/16" 12" CLOSED 8-1/8" 8-1/2"
Johnson Hand Crimp Tool must be used to attach fittings to cable. See page 31.
*Swage with 7/32" die. 1/4" does not come as shown with interrupted thread. All-thread standard.
Classic Button Turnbuckle
4-1/2"
OPEN CLOSED
The Classic Button and Swage Turnbuckle has a clean simple look with no jaw. It must be used on a straight run and attached in a through hole with the button on the backside of the baluster.
Button Attachment
9/32" hole or 11/32" hole for 1/4" wire
Best if used with Button Terminal...
W
(see pg. 26)
End Post thickness can be up to 11/2" or add-L for 31/2" (Same Price)
Complete Cable Assembly (Example)
Machine Swage
CAT. NO. 19-314-10F 19-316-10F 19-308-7F* WIRE SIZE 1/8" 3/16" 1/4" THREAD SIZE 1/4" 1/4" 5/16" OPEN 11-1/2" 11-1/2" 14-1/4" CLOSED 8-1/4" 8-1/4" 10-1/2"
Hand Crimp
CAT. NO. 26-412-10F 27-412-10F WIRE SIZE 1/8" 3/16" THREAD SIZE 1/4" 1/4" OPEN 11-11/16" 12" CLOSED 8-1/8" 8-1/2"
Johnson Hand Crimp Tool must be used to attach fittings to cable. See page 31.
*Swage with 7/32" die. 1/4" does not come as shown with interrupted thread. All-thread standard.
Johnson Architectural * Tel 800.874.7455 * Fax 860.873.8589 * www.csjohnson.com
19
