Turnbuckles
Classic Swage to Swage Turnbuckle
4-1/2"

OPEN CLOSED

Appearing in the middle of the cable, the Classic Swage to Swage Turnbuckle needs a fitting at each end to make a complete assembly. You need to use three fittings per cable run, but it makes for a distinctive look.
Also available in "Shortie" size, 3" long body with 2" of adjustment.

Swage to Swage
Swage to swage appears in the middle of the cable run.

Can be used with Toggle Jaw or etc...

(see pg. 26)

Complete Cable Assembly (Example)

Machine Swage
CAT. NO. 19-314-3 19-316-6 19-308-27* 19-308-2
* Swage with 7/32" die.

Hand Crimp
THREAD SIZE 1/4" 1/4" 5/16" 3/8" OPEN 11-3/4" 11-3/4" 13-1/4" 14-7/8" CLOSED 8-3/4" 8-3/4" 9-3/4" 10-5/8"
Johnson Hand Crimp Tool must be used to attach fittings to cable. See page 31.

WIRE SIZE 1/8" 3/16" 1/4" 1/4"

CAT. NO. 26-412-3 27-412-6

WIRE SIZE 1/8" 3/16"

THREAD SIZE 1/4" 1/4"

OPEN 12-1/2" 12-1/2"

CLOSED 9-1/2" 9-1/2"

Decko Jaw to Swage Turnbuckle
3"

The Decko Jaw and Swage Turnbuckle is an excellent choice for a wide variety of applications. A clevis pin in the jaw attaches to eyes, tabs or in a channel. Can be used in straight runs or at an angle.

OPEN CLOSED

Jaw Attachment Tab
1/4" hole 1"or longer 5/16" Weld this edge to corner bracket 3/4"

Best if used with Toggle Jaw...

Complete Cable Assembly (Example)

(see pg. 26)

1/4" thick stock

Can also use Security Bolt (See pg. 27).

Machine Swage
CAT. NO. 19-314-DE 19-316-DE WIRE SIZE 1/8" 3/16" THREAD SIZE 1/4" 1/4" OPEN 11-1/4" 11-1/4" CLOSED 8-1/4" 8-1/4"

Hand Crimp
CAT. NO. 26-412-DE 27-412-DE WIRE SIZE 1/8" 3/16" THREAD SIZE 1/4" 1/4" OPEN 11-5/8" 11-5/8" CLOSED 8-3/4" 8-3/4"

20

NOTE: Not available for 1/4" cable.

Johnson Hand Crimp Tool must be used to attach fittings to cable. See page 31.

Johnson Architectural * Tel 800.874.7455 * Fax 860.873.8589 * www.csjohnson.com

These fittings are not for lifting, hanging or other high load applications. See Marine Catalog for Rigging Hardware.

Decko Deck Toggle Turnbuckle
3"

OPEN CLOSED

Our Decko Deck Toggle and Swage Turnbuckle can be mounted to any flat surface and is held in place by two tabs suitable for through bolting. The best feature of the deck toggle is it can articulate 140 degrees.

Deck Toggle Attachment
9/32" Dia.

Best if used with Deck Toggle...

1516"

(see pg. 26)

Flat Surface

Complete Cable Assembly (Example)

Machine Swage
CAT. NO. 19-314-1T-DE 19-316-1T-DE WIRE SIZE 1/8" 3/16" THREAD SIZE 1/4" 1/4" OPEN 11-1/4" 11-1/4" CLOSED 8-1/4" 8-1/4"

Hand Crimp
CAT. NO. 26-412-1T-DE 27-412-1T-DE WIRE SIZE 1/8" 3/16" THREAD SIZE 1/4" 1/4" OPEN 11-5/8" 11-5/8" CLOSED 8-3/4" 8-3/4"

NOTE: Not available for 1/4" cable.

Johnson Hand Crimp Tool must be used to attach fittings to cable. See page 31.

Decko Ball End Turnbuckle
3"

OPEN CLOSED

The Decko Ball End and Swage Turnbuckle is made to accept the angles of stairways. The Ball End allows the turnbuckle to integrate itself to your desired angle. The ball allows this turnbuckle to gimbal in its mount.

Ball End Attachment
9/32"

Best if used with Ball Terminal...
Drill mounting holes at true angles or with slots.

X

SLOT LENGTH
THICKNESS

(see pg. 26)

PLATE

1/4"

3/8"

1/2"

Complete Cable Assembly (Example)

X

1/2" 19/32" 11/16"

Machine Swage
CAT. NO. 19-314-10B-DE 19-316-10B-DE WIRE SIZE 1/8" 3/16" THREAD SIZE 1/4" 1/4" OPEN 11-1/4" 11-1/4" CLOSED 8-1/4" 8-1/4"

Hand Crimp
CAT. NO. 26-412-10B-DE 27-412-10B-DE WIRE SIZE 1/8" 3/16" THREAD SIZE 1/4" 1/4" OPEN 11-5/8" 11-5/8" CLOSED 8-3/4" 8-3/4"

NOTE: Not available for 1/4" cable.

Johnson Hand Crimp Tool must be used to attach fittings to cable. See page 31.

Johnson Architectural * Tel 800.874.7455 * Fax 860.873.8589 * www.csjohnson.com

21