Turnbuckles
Decko Button Turnbuckle
3"

OPEN CLOSED

The Decko Button and Swage Turnbuckle has a clean simple look with no jaw. It must be used on a straight run and attached in a through hole with the button on the backside of the baluster.

Button Attachment
9/32" hole

Best if used with Button Terminal...
W
(see pg. 26)

Complete Cable Assembly (Example)

End Post thickness can be up to 11/2" or add-L for 31/2" (Same Price)

Machine Swage
CAT. NO. 19-314-10F-DE 19-316-10F-DE WIRE SIZE 1/8" 3/16" THREAD SIZE 1/4" 1/4" OPEN 11-1/4" 11-1/4" CLOSED 8-1/4" 8-1/4"

Hand Crimp
CAT. NO. 26-412-10F-DE 27-412-10F-DE WIRE SIZE 1/8" 3/16" THREAD SIZE 1/4" 1/4" OPEN 11-5/8" 11-5/8" CLOSED 8-3/4" 8-3/4"

NOTE: Not available for 1/4" cable.

Johnson Hand Crimp Tool must be used to attach fittings to cable. See page 31.

Decko Swage to Swage Turnbuckle
3"

OPEN CLOSED

Appearing in the middle of the cable, the Decko Swage to Swage Turnbuckle needs a fitting at each end to make a complete assembly. You need to use three fittings per cable run, but it makes for a distinctive look.

Swage to Swage
Swage to swage appears in the middle of the cable run.

Best if used with Toggle Jaw...

(see pg. 26)

Complete Cable Assembly (Example)

Machine Swage
CAT. NO. 19-314-3DE 19-316-6DE WIRE SIZE 1/8" 3/16" THREAD SIZE 1/4" 1/4" OPEN 11-1/4" 11-1/4" CLOSED 8-1/4" 8-1/4"

Hand Crimp
CAT. NO. 26-412-3DE 27-412-6DE WIRE SIZE 1/8" 3/16" THREAD SIZE 1/4" 1/4" OPEN 11-5/8" 11-5/8" CLOSED 8-3/4" 8-3/4"

NOTE: Not available for 1/4" cable.

Johnson Hand Crimp Tool must be used to attach fittings to cable. See page 31.

22

Johnson Architectural * Tel 800.874.7455 * Fax 860.873.8589 * www.csjohnson.com

These fittings are not for lifting, hanging or other high load applications. See Marine Catalog for Rigging Hardware.

Jaw Smooth Line Turnbuckle
4-3/4"

OPEN CLOSED

The Smooth Line Turnbuckles are state-of-the-art fittings. The cable is terminated internally. One does not see a swage terminal (or threads) as on a conventional turnbuckle. The Jaw Smooth Line Turnbuckle adapts itself to a wide variety of projects. The jaw will easily attach to eyes, tabs or in a channel.

Jaw Attachment Tab
W D H E
Can also use Security Bolt (See Pg. 27)

Best if used with Toggle Jaw...

Weld this edge to corner bracket

L
D
(Hole Dia.)

For Pin
(see pg. 26)

E 5/16" 3/8"

L

H

W 1/4" 5/16"

(Dist. from Edge) (Length) (Min. Height) (Stock Width)

Complete Cable Assembly (Example)

1/4" 5/16"

9/32" 11/32"

3/4" 1" 1-1/4" 1-1/2"

Machine Swage
CAT. NO. 60-700 60-702 60-704* WIRE SIZE 1/8" 3/16" 1/4" THREAD SIZE 1/4" 1/4" 5/16" OPEN 8" 8" 9" CLOSED 6-5/16" 6-5/16" 7"

Hand Crimp
CAT. NO. 26-715 27-715 WIRE SIZE 1/8" 3/16" THREAD SIZE 1/4" 1/4" OPEN 8" 8" CLOSED 6-5/16" 6-5/16"

*swage with 7/32" die.

Johnson Hand Crimp Tool must be used to attach fittings to cable. See page 31. Does not work with Wireteknik Swaging Machines.

Deck Toggle Smooth Line Turnbuckle

OPEN CLOSED

4-3/4"

Deck Toggle Attachment
The Deck Toggle Smooth Line Turnbuckle will mount to any flat surface. It can be through bolted by its two tabs and also has the ability to toggle 140 degrees.
*9/32" or 11/32" Dia.

15/16"

or 1 / "
1 2

Best if used with Deck Terminal...
(see pg. 26)

Deck Toggle Outline

11

* 932" for 18"& 316" cable. 32" for 14" cable.
1516" for 18"& 316" cable. 112" for 14" cable.

Complete Cable Assembly (Example)

Flat Surface

Machine Swage
CAT. NO. 60-700-1 60-702-1 60-704-1* WIRE SIZE 1/8" 3/16" 1/4" THREAD SIZE 1/4" 1/4" 5/16" OPEN 8" 8" 8" CLOSED 6-5/16" 6-5/16" 6"

Hand Crimp
CAT. NO. 26-715-1 27-715-1 WIRE SIZE 1/8" 3/16" THREAD SIZE 1/4" 1/4" OPEN 8" 8" CLOSED 6-5/16" 6-5/16"

*swage with 7/32" die.

Johnson Hand Crimp Tool must be used to attach fittings to cable. See page 31. Does not work with Wireteknik Swaging Machines.

Johnson Architectural * Tel 800.874.7455 * Fax 860.873.8589 * www.csjohnson.com

23