Tools Portable Hydraulic Press Swager - by Johnson
Swaging range: 1/8" - 3/16" Dimensions: L 7" W 5 1/2" H 13" Shipping Weight: 50 lbs

Made in USA

Johnson's New Portable Hydraulic Press Swager is a true hydraulic press. This swager presses the fittings onto the cable. All that is required to run this swager is 100 psi of compressed air. The air is coupled to an air over hydraulic foot switch. At 50 lbs. this swager is very portable. An electric over hydraulic pump is also available for 110v. Made in USA. Not rated for mil-spec fittings.

Locoloc(R) Manual Bench Swager - Type II
Swaging range: 1/16" - 3/8" Dimensions: L 12" W 9" H 12" Shipping Weight: 250 lbs

Cal l info for mo rma r tion e .

Made in USA Makes Mil-Spec Swages

WireTeknik TM Roller Swagers
Made in Sweden Makes Mil Spec Swages NOTE: Cannot swage Smooth Line turnbuckles or 1/8" Terminator Turnbuckles. Adapter needed for deck toggles.

A100
Swaging range: 1/16" - 3/16" Dimensions: L 19 3/4" W 11 3/4" H 4" Shipping Weight: 50 lbs (A200 Shown)

A200
Swaging range: 1/16" - 5/16" Dimensions: L 17" W 11" H 4 3/4" Shipping Weight: 100 lbs

A250
Swaging range: 3/32" - 1/2" Dimensions: L 37" W 15 3/8" H 6 9/32" Shipping Weight: 150 lbs

30

Johnson Architectural * Tel 800.874.7455 * Fax 860.873.8589 * www.csjohnson.com

Profession Tension Gauge for 1x19 Cable Railing
Johnson's new Professional Tension Gauge for 1x19 Cable Railing is designed to measure the cable tension of 1/8", 3/16" and 1/4" 1x19 cable. This gauge takes the guess work out of cable railing setup. Made from anodized aluminum, the gauge is easy to use and compact. A must for the tool box of anyone installing cable rails.

Cable Range: 1/8", 3/16" & 1/4" Dimensions: 11" x 5-1/2" Tension Range: 200 lbs - 400 lbs

CAT. NO # 53-300

Made in USA

Hand Crimping Tools & Cutters
Hand Crimp fittings are attached to the cable with a Johnson-made Hand Crimp Tool model #53-210 (not shown) or #53-215. Hand Crimp fittings should not be confused with Nicopress fittings. Nicopress fittings have sleeves that are made from soft copper alloy and compress very easily. Other crimping tools will not compress Johnson stainless steel fittings properly. Only use a Johnson approved tool.

1

2

1. Our Lever Type Tool has two cavities for 1/8" and 3/16" Hand Crimp fittings. This is a good production tool for the dealer.
Lever Type Tool Cat. No. 53-215

3

2. Our Felco Cable Cutter will give you a clean, crisp cut through 1/4" sized cables. Swiss made
Felco Cable Cutter Cat. No. 53-220

3. Our Larger Felco Cable Cutter cuts cable through 3/8."
Larger Felco Cable Cutter Largest Felco Cable Cutter Cat. No. 53-222 Cat. No. 53-224 (not shown)

Our Largest Felco Cable Cutter cuts cable through 5/8".

Johnson Architectural * Tel 800.874.7455 * Fax 860.873.8589 * www.csjohnson.com

31