These fittings are not for lifting, hanging or other high load applications. See Marine Catalog for Rigging Hardware.

Terminal Tuner Turnbuckle
1-5/8"
Body Only available

9/16" 3/16" Allen Cap
OPEN CLOSED

The Terminal Tuner Turnbuckle is a simple way to Terminal Tuner Attachment terminate cable with conventional threaded terminals. 13/32" hole for Installation and adjustment are a breeze with Terminal 1/8" & 3/16" Terminal Tuner Tuners. Available complete with a threaded terminal or body only. 15/32" hole for Best if used with itself... Complete Cable Assembly (Example)
1/4" Terminal Tuner End Post

Machine Swage
CAT. NO. 35-703-4 35-703-6 35-708-8* 35-703 35-705 WIRE SIZE 1/8" 3/16" 1/4" Body Only Body Only THREAD SIZE 1/4"-28 R.H. 1/4"-28 R.H. 5/16"-24 R.H. 1/4"-28 R.H. 5/16"-24 R.H. OPEN 4-1/4" 4-5/8" 4-7/8" ----CLOSED 2-7/8" 3-3/8" 3-5/8" -----

Hand Crimp
CAT. NO. 26-703-4 27-703-6 WIRE SIZE 1/8" 3/16" THREAD SIZE 1/4"-28 R.H. 1/4"-28 R.H. OPEN 4-7/8" 5-3/8" CLOSED 3-3/8" 3-7/8"

Johnson Hand Crimp Tool must be used to attach fittings to cable. See page 31.

*swage with 7/32" die NOTE: Terminals for body only found on pages 13 and 20 in Marine Catalog.

The Terminal Tuner is also available with an 82 bevel head for 1/8" and 3/16" cable for flush mounting. Please add "B" to end of part number to order.

Threaded Terminal
LENGTH

The simplest way to make a cable assembly is with a threaded terminal at each end. Clean and simple, this style can span up to 50 ft. in a straight run. Larger sizes available. Please see page 35 in the Marine Catalog. Best if used with Threaded Terminal...

Threaded Terminal Attachment
9/32" hole, 1/4" thread 11/32" hole, 5/16" thread 13/32" hole, 3/8" thread

Complete Cable Assembly (Example)

W

End Post Thickness can be up to 31/2"

Machine Swage
CAT. NO. 30-603-1 30-608-1 30-615-1* 30-613-1 25-316-L WIRE SIZE 1/8" 3/16" 1/4" 1/4" 3/16" THREAD SIZE 1/4-28 x 2-1/2" 1/4-28 x 2-1/2" 5/16-24 x 2-1/2" 3/8-24 x 3" 1/4-28 x 2-1/2" LENGTH 3-3/4" 4-1/4" 4-3/4" 5-1/4" 7-9/16"

Hand Crimp
CAT. NO. 31-603-1 31-607-1 25-415-L WIRE SIZE 1/8" 3/16" 3/16" THREAD SIZE 1/4-28 x 2-1/2" 1/4-28 x 2-1/2" 1/4-28 x 2-1/2" LENGTH 4-7/16" 4-13/16" 8-3/8""

Johnson Hand Crimp Tool must be used to attach fittings to cable. See page 31.

*swage with 7/32" die.

Johnson Architectural * Tel 800.874.7455 * Fax 860.873.8589 * www.csjohnson.com

17