Turnbuckles
Classic Jaw Turnbuckle
4-1/2"

OPEN CLOSED

The Classic Jaw and Swage Turnbuckle is an excellent choice for a wide variety of applications. A clevis pin in the jaw attaches to eyes, tabs or in a channel. Can be used in straight run or at an angle. Larger sizes available. Please see page 29 in Marine Catalog.
Also available in "Shortie" size, 3" long body with 2" of adjustment.

Jaw Attachment Tab
W D H E
Weld this edge to corner bracket

Best if used with Toggle Jaw...

L
D
(Hole Dia.)

Can also use Security Bolt (See pg. 26)

For Pin
(see pg. 26)

E 5/16" 3/8" 1/2"

L

H

W 1/4" 5/16" 3/8"

(Dist. from Edge) (Length) (Min. Height) (Stock Width)

Complete Cable Assembly (Example)

1/4" 5/16" 3/8"

9/32" 11/32" 25/64"

3/4" 1" 1-1/4" 1-1/2" 1-1/4" 1-1/2"

Machine Swage
CAT. NO. 19-314 19-316 19-318-7* 19-308 WIRE SIZE 1/8" 3/16" 1/4" 1/4" THREAD SIZE 1/4" 1/4" 5/16" 3/8" OPEN 11-1/4" 11-1/4" 12-3/4" 14-1/4" CLOSED 8-1/4" 8-1/4" 9" 10"

Hand Crimp
CAT. NO. 26-412 27-412 WIRE SIZE 1/8" 3/16" THREAD SIZE 1/4" 1/4" OPEN 11-5/8" 11-5/8" CLOSED 8-3/4" 8-3/4"

Johnson Hand Crimp Tool must be used to attach fittings to cable. See page 31.

*swage with 7/32" die

Classic Deck Toggle Turnbuckle
OPEN CLOSED

4-1/2"

Our Classic Deck Toggle and Swage Turnbuckle can be mounted to any flat surface and is held in place by two tabs suitable for through bolting. The best feature of the deck toggle is it can articulate 140 degrees.
Also available in "Shortie" size, 3" long body with 2" of adjustment.

Deck Toggle Attachment
*9/32" or 11/32" Dia.

15/ " 16

or 1 / "
1 2

Best if used with Deck Terminal... Complete Cable Assembly (Example)
(see pg. 26)

Deck Toggle Outline

11

* 932" for 18"& 316" cable. 32" for 14" cable.
1516" for 18"& 316" cable. 112" for 14" cable.

Flat Surface

Machine Swage
CAT. NO. 19-314-1T 19-316-1T 19-318-1T* WIRE SIZE 1/8" 3/16" 1/4" THREAD SIZE 1/4" 1/4" 5/16" OPEN 10-3/4" 11-1/4" 12" CLOSED 7-3/4" 8-1/4" 9"

Hand Crimp
CAT. NO. 26-412-1T 27-412-1T WIRE SIZE 1/8" 3/16" THREAD SIZE 1/4" 1/4" OPEN 11-1/2"" 11-1/2"" CLOSED 8-1/2" 8-1/2"

*swage with 7/32" die

Johnson Hand Crimp Tool must be used to attach fittings to cable. See page 31.

18

Johnson Architectural * Tel 800.874.7455 * Fax 860.873.8589 * www.csjohnson.com