These fittings are not for lifting, hanging or other high load applications. See Marine Catalog for Rigging Hardware.

Classic Ball End Turnbuckle
4-1/2"

OPEN CLOSED

The Classic Ball End and Swage Turnbuckle is made to accept the angles of stairways. The Ball End allows the turnbuckle to integrate itself to your desired angle. The ball allows this turnbuckle to gimbal in its mount. Note: 5/32" cable size available

Ball End Attachment

Width 9/32" or *11/32" * for 1/4" wire Hole X

Best if used with Ball End Terminal...
Drill mounting holes at true angles or with slots. SLOT LENGTH
THICKNESS

PLATE

(see pg. 26)

1/4"

3/8"

1/2"

Complete Cable Assembly (Example)

X

1/2" 19/32" 11/16"

Machine Swage
CAT. NO. 19-314-10B 19-316-10B 19-308-7B* WIRE SIZE 1/8" 3/16" 1/4" THREAD SIZE 1/4" 1/4" 5/16" OPEN 11-1/4" 11-1/4" 14-1/8" CLOSED 8-1/4" 8-1/4" 10-1/4"

Hand Crimp
CAT. NO. 26-412-10B 27-412-10B WIRE SIZE 1/8" 3/16" THREAD SIZE 1/4" 1/4" OPEN 11-11/16" 12" CLOSED 8-1/8" 8-1/2"

Johnson Hand Crimp Tool must be used to attach fittings to cable. See page 31.

*Swage with 7/32" die. 1/4" does not come as shown with interrupted thread. All-thread standard.

Classic Button Turnbuckle
4-1/2"

OPEN CLOSED

The Classic Button and Swage Turnbuckle has a clean simple look with no jaw. It must be used on a straight run and attached in a through hole with the button on the backside of the baluster.

Button Attachment
9/32" hole or 11/32" hole for 1/4" wire

Best if used with Button Terminal...
W
(see pg. 26)

End Post thickness can be up to 11/2" or add-L for 31/2" (Same Price)

Complete Cable Assembly (Example)

Machine Swage
CAT. NO. 19-314-10F 19-316-10F 19-308-7F* WIRE SIZE 1/8" 3/16" 1/4" THREAD SIZE 1/4" 1/4" 5/16" OPEN 11-1/2" 11-1/2" 14-1/4" CLOSED 8-1/4" 8-1/4" 10-1/2"

Hand Crimp
CAT. NO. 26-412-10F 27-412-10F WIRE SIZE 1/8" 3/16" THREAD SIZE 1/4" 1/4" OPEN 11-11/16" 12" CLOSED 8-1/8" 8-1/2"

Johnson Hand Crimp Tool must be used to attach fittings to cable. See page 31.

*Swage with 7/32" die. 1/4" does not come as shown with interrupted thread. All-thread standard.

Johnson Architectural * Tel 800.874.7455 * Fax 860.873.8589 * www.csjohnson.com

19