End Fittings
Toggle Jaw
Machine Swage
CAT. NO. WIRE SIZE 1/8" 3/16" 1/4" 1/4" LENGTH 3-3/16" 3-5/16" 3-1/4" 3-3/4" PIN SIZE 1/4" 1/4" 5/16" 3/8"

LENGTH

25-314 25-316 25-318-7* 25-308

*swage with 7/32" die

Hand Crimp
CAT. NO. 26-415# 27-415 WIRE SIZE 1/8" 3/16" LENGTH 3-3/16" 3-13/16" PIN SIZE 1/4" 1/4"

#not true 1/8" fitting (conversion sleeve included)

Deck Terminal
Machine Swage
CAT. NO. 25-314-1T 25-316-1T 25-318-1T* WIRE SIZE 1/8" 3/16" 1/4" LENGTH 2-1/8" 2-1/8" 3-1/4" HOLE SIZE 1/4" 1/4" 5/16"

Johnson Hand Crimp Tool must be used to attach fittings to cable. See page 31.

Hand Crimp
LENGTH
CAT. NO. 26-415-1T# 27-415-1T WIRE SIZE 1/8" 3/16" LENGTH 2-3/4" 3" HOLE SIZE 1/4" 1/4"

*swage with 7/32" die

1516" or 112"

*

#not true 1/8" fitting (conversion sleeve included)
Johnson Hand Crimp Tool must be used to attach fittings to cable. See page 31.

*1516" for 18"& 316" cable. 112" for 14" cable.

Button Terminal
Machine Swage
LENGTH 9/16"
(Does not have adjustment)
CAT. NO. 25-304-5F 25-306-5F 25-308-7-5F* WIRE SIZE 1/8" 3/16" 1/4" LENGTH 1-3/4" 2-1/8" 2-1/2" THREAD 1/4" X 28 1/4" X 28 5/16" X 24

*swage with 7/32" die

Hand Crimp
CAT. NO. 26-405-5F 27-405-5F WIRE SIZE 1/8" 3/16" LENGTH 2-3/8" 2-3/4" THREAD 1/4" X 28 1/4" X 28
Johnson Hand Crimp Tool must be used to attach fittings to cable. See page 31.

Ball Terminal
Machine Swage
CAT. NO. 25-304-5B 25-306-5B 25-308-7-5B* WIRE SIZE 1/8" 3/16" 1/4" LENGTH 1-11/16" 2-1/8" 2-1/2" THREAD 1/4" X 28 1/4" X 28 5/16" X 24

LENGTH 5/8"

*swage with 7/32" die

Hand Crimp
CAT. NO. 26-405-5B 27-405-5B WIRE SIZE 1/8" 3/16" LENGTH 2-3/8" 2-3/4" THREAD 1/4" X 28 1/4" X 28
Johnson Hand Crimp Tool must be used to attach fittings to cable. See page 31.

26

Johnson Architectural * Tel 800.874.7455 * Fax 860.873.8589 * www.csjohnson.com