Rigging Hardware
Large Diamond Plates

This design compliments the looks of our new larger backstay car. Comes complete with cotter and clevis pins. T-316 stainless steel. Must be used in pairs.

Diamond Plate Split Backstay Car See Pg 30 for best operational ratio. Vertical Tackle Example Open Transom Example

CAT. NO.
X7050 X7051 X7052

PIN SIZE TOP HOLE
1/2" 5/8" 3/4"

PIN SIZE BOTTOM HOLE
1/2" 5/8" 5/8"

PLATE THICKNESS
3/16" 3/16" 1/4"

PIN TO PIN L BOTTOM
2" 2-1/4" 2-1/4"

PIN TO PIN L BOTTOM TO TOP
2-1/4" 2-1/2" 2-3/4"

SAFE WORKING LOAD
4200 lbs. 5900 lbs. 9000 lbs.

Diamond Plate - Backstay

An integral part of the Johnson Marine Split Backstay Adjuster System. Part No. 38-211 & 212 are double plates and may also be used with eye terminals. Pins not included.

CAT. NO.
38-210 38-211 38-212

PIN DIA.
1/4" 5/16" 3/8"

SAFE WORKING LOAD
1000 lbs. 1600 lbs. 2800 lbs.

1"

1-11/16"

Stay Extenders / Link Plates

These stainless steel plates are designed for extending short stays, or to replace a turnbuckle. Several of these are a must for the ship's kit. All sizes include pins.
CAT. NO.
16-204 16-205 16-206 16-208 16-210

PIN DIA.
1/4" 5/16" 3/8" 1/2" 5/8"

MAX. PIN TO PIN
3 3/4" 4 3/8" 5" 5-5/8" 6-7/8"

SAFE WORKING LOAD
1000 lbs. 1600 lbs. 2800 lbs. 4200 lbs. 5900 lbs.

Johnson Marine * Tel 860.873.8697 * Fax 860.873.8589 * www.csjohnson.com

31