Rigging Hardware
Toggle Jaws for Machine Swage
This fitting's universal toggle action prevents any adverse bending of wire. Pins included.

Toggle Nut Style

"T" Toggle Style

E
F

D C

A
CAT. NO.
17-203 17-204 17-214** 17-205 17-205-2 17-215-2** 17-206 17-216** 17-207 17-208 17-209 17-210 17-211 17-212 17-213

B

WIRE SIZE
3/32" 1/8" 1/8" 5/32" 5/32" 5/32" 3/16" 3/16" 7/32" 1/4" 1/4" 9/32" 5/16" 5/16" 3/8"

A
2-3/4" 3" 2-7/8" 3-1/4" 3-3/4" 4-1/2" 4-1/4" 4-3/4" 4-1/2" 4-3/4" 5-1/4" 5-1/2" 5-3/4" 6-1/2" 7"

B
1-1/2" 1-1/2" 1-5/16" 1-1/2" 2-1/8" 2-5/8" 2-1/4" 2-5/8" 2-1/4" 2-1/4" 2-5/8" 2-7/8" 2-7/8" 3-1/4" 3-1/4"

C
11/16" 11/16" 7/8" 11/16" 1" 1" 7/8" 1" 7/8" 7/8" 1-1/16" 1-1/16" 1-1/16" 1-3/16" 1-5/16"

D
1/4" 1/4" 1/4" 1/4" 5/16" 5/16" 3/8" 5/16" 3/8" 3/8" 1/2" 1/2" 1/2" 5/8" 5/8"

E
1/4" 1/4" 1/4" 1/4" 5/16" 5/16" 3/8" 5/16" 3/8" 3/8" 1/2" 1/2" 1/2" 5/8" 5/8"

F

BEFORE SWAGE DIA. *
.218

AFTER SWAGE DIA. *
.190 .219 .219 .250 .250 .250 .313 .313 .375 .438 .438 .500 .563 .563 .625

SAFE WORKING LOAD
1000 lbs 1000 lbs 1000 lbs 1000 lbs 1600 lbs 1600 lbs 2800 lbs 1600 lbs 2800 lbs 2800 lbs 3500 lbs 3500 lbs 4200 lbs 4200 lbs 5900 lbs

5/8"

.250 .250 .297 .297

3/4"

.297 .359

7/8"

.359 .427 .494 .494

1-1/8"

.563 .635 .635

1-3/8"

.703

** With T-Toggle Jaw *All tolerances are: +.000 - .005 Dimensions shown are inches. NOTE: Before and After swage dimensions are mil spec and conform to both our life line and rigging fittings with regard to all aspects except cable depth in fittings. (See chart on page 52.) The primary difference between life line and rigging fittings is the cable depth, although other factors exist. Always use rigging fittings when in doubt or wherever high load applications exist. Never exceed the safe working load. Johnson Marine * Tel 860.873.8697 * Fax 860.873.8589 * www.csjohnson.com

33