Rigging Hardware
Rigging Toggles
These stainless steel rigging toggles are essential to prevent misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging that was made too short. Ultimate strength exceeds the corresponding clevis pin. All sizes include pins.

Specifications & Data
CAT. NO.
12-120 12-121 12-122 12-126 12-123 12-124 12-125

A
1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4"

B
1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4"

C
.094 .094 .141 .165 .187 1/4" 1/4"

D
5/16" 19/64" 23/64" 27/64" 31/64" 39/64" 47/64"

E
1" 1-1/4" 1-5/8" 1-11/16" 1-7/8" 2-1/4" 2-3/4"

F
5/16" 11/32" 13/32" 15/32" 17/32" 11/16" 13/16"

G
5/8" 5/8" 3/4" 7/8" 1" 1-1/4" 1-1/2"

SAFE WORKING LOAD
1000 lbs 1600 lbs 2800 lbs 3500 lbs 4200 lbs 5900 lbs 9000 lbs
D E

Double Jaw Toggles
Like our Eye Jaw toggles only used to facilitate toggling action when used with marine eyes and mechanical fittings. These toggles are available in 7 sizes from 14"- 3/4" pin sizes. All sizes include pins.

G

F

Specifications & Data
CAT. NO. A B C D E F G SAFE WORKING LOAD

B

C

A

Upper Replacement Washer
320W 321W 322W 326W 323W 324W 325W

Upper Replacement Clevis Pin w/ Cotter
CP-4-20c CP-5-24c CP-6-32c CP-7-40c CP-8-40c CP-10-48c CP-12-48-1c

12-320 12-321 12-322 12-326 12-323 12-324 12-325

1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4"

1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4"

13GA 13GA 10GA 8GA 3/16" 1/4" 1/4"

5/8" 3/4" 1" 1-1/8" 1-1/4" 1-1/2" 1-3/4"

1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4"

1-1/16" 1-1/4" 1-1/12" 1-3/4" 2" 2-1/2" 3"

1/2" 5/8" 3/4" 7/8" 1" 1-1/4" 1-1/2"

1000 lbs 1600 lbs 2800 lbs 3500 lbs 4200 lbs 5900 lbs 9000 lbs

Swivel Jaw
This neat fitting has many applications where a swivel is required. Rugged stainless steel with a breaking strength of over 5,000 lbs.* Pin Diameter 5/16". Pin to Pin 2 1/4". * We recommend a working load of not over 40% of this amount.
Swivel Jaw Cat. No. 100-700

38

Johnson Marine * Tel 860.873.8697 * Fax 860.873.8589 * www.csjohnson.com