Accessories
Flag Halyard Kits
Backstay Flag Halyard Kit Everything you need to rig a backstay flag halyard. 40 ft. of 3/16" polyester line, block with wire rope clamp, cleat with wire rope clamp and (2) bronze snaps. Easily attaches to 5/32" thru 3/8" Dia. wire or rod.
Backstay Halyard Kit Cat. No. 40-529

Spreader Halyard Kit Includes 40 ft. of polyester line, block with bail and shroud cleat.
Spreader Halyard Kit Cat. No. 40-530

Tuna Tower Halyard Kit Includes 40 ft. of polyester line, block with rail mount, cleat with rail mount and (2) bronze snaps. Will accommodate tower tube diameter 7/8" and 1".
Tuna Tower Halyard Kit Cat. No. 40-531

Spinnaker Pole Stanchion Mount

This set of spinnaker pole holders makes storage and quick retrieval simple. One end of the pole is slid through the vinyl coated wire loop of the aft holder, the end fitting of the opposite end is securely snapped on the bail of the forward holder. Price includes the set as shown.
For Pole Dia. 2" & 2-1/2" For Pole Dia. 3" For Pole Dia. 3-1/2" Cat. No. 40-556 Cat. No. 40-557 Cat. No. 40-558

Sealube - Turnbuckle Lubricant

Space age synthetic lubricant especially formulated for turnbuckles or any high bearing load, low speed application. Will carry higher bearing loads than any other lubricant. Provides powerful resistance to corrosion of the host metal. Water resistant and long lasting.
1 oz. bottle Case/24 bottles Cat. No. 48-540 Cat. No. 48-541

Halyard J Hook

The JOHNSON J HOOK is a simple and effective solution to halyard drumming without the nuisance of tying off. Just walk to the rail and engage halyard with the J HOOK, cleat and it's done. No sharp or rough edges on this stainless steel fitting Locate as pictured below to catch sails. Install a pair for main and jib halyards. Each J HOOK will accept several halyards. Weight only 2 oz.
Halyard J Hook Halyard J Hook Pair Cat. No. 40-527 Cat. No. 40-528
Fasten with #10 screws or rivets

48

Johnson Marine * Tel 860.873.8697 * Fax 860.873.8589 * www.csjohnson.com