Life Line Fittings - Machine Swage
Open Body Turnbuckle
Jaw to Swage
Classic, traditional design. Forged silicon bronze body with T-316 stainless ends.
Not for lifting, hanging or other high load applications. See page 22 for Rigging Hardware.
42-314 42-315 42-316 43-318-7 44-318
Chrome Chrome Chrome Chrome Chrome
1/8" wire 1/4" pin 5/32" wire 1/4" pin 3/16" wire 1/4" pin 1/4" wire 5/16" pin 1/4" wire 3/8" pin
3" adj 3" adj 3" adj 3" adj 4" adj
(43-318-7 uses 7/32"swage)
Tubular Turnbuckle
Jaw to Swage - Check Nut Locking
Our most popular life line turnbuckle. Check nut locking. T-316 stainless.
19-314-2 19-314 19-315 19-316 19-308 19-318-7
1/8" wire 1/8" wire 5/32" wire 3/16" wire 1/4" wire 1/4" wire
3/16" pin 1/4" pin 1/4" pin 1/4" pin 3/8" pin 5/16" pin
2-1/2" adj 3" adj 3" adj 3" adj 4-1/4" adj 3-3/4" adj
(19-318-7 uses 7/32" die)
Tubular Slotted Turnbuckle
Jaw to Swage - Positive Locking Rings
Unique design features a slot with wraparound rings which fit through a cross-hole in terminal for secure locking. T-316 stainless.
19-324 19-325 19-326 36-605 19-328 36-602
1/8" wire 5/32" wire 3/16" wire 1/4" wire
1/4" pin 1/4" pin 1/4" pin 3/8" pin
2-7/8" adj 2-7/8" adj 2-7/8" adj 3-1/4" adj
Locking Ring for above Locking Ring for above 36-602/605
Deck Toggle Turnbuckle
19-314-1T 19-315-1T 19-316-1T 19-318-1T
1/8" wire 5/32" wire 3/16" wire 1/4" wire
1/4"-28 1/4"-28 1/4"-28 5/16"-24
3" adj 3" adj 3" adj 3" adj
This "T" bolt style fitting is used on decks or bulkheads. Toggle nut style also available to match old style. T-316 stainless.
(19-318-1T uses 7/32" swage)
Replacem
ent Parts on Pages 13 & 14
2" adj 2" adj 2" adj 2" adj
Swage Sleeve- 1/8" Swage Sleeve-5/32" Swage Sleeve- 3/16" Swage Sleeve- 1/4"
"Smooth Line" Turnbuckle
Closed Thread
Very popular architectural turnbuckle also great for life lines. No exposed threads. Cable termination is hidden inside of body and rotates on threaded cap. For details see page 4 of architectural section. T-316 stainless.
60-700 60-701 60-702 60-704
60-610 60-610-1 60-611 60-611-1
1/8" wire 5/32" wire 3/16" wire 1/4" wire
Nose Cone- 1/8" Nose Cone- 5/32" Nose Cone- 3/16" Nose Cone- 1/4"
1/4" pin 1/4" pin 1/4" pin 5/16" pin
60-613 60-620 60-612 60-612-1
Smooth Line Replacement Parts
Adjuster Turnbuckle
Jaw to Swage
Stamped, strap design turnbuckle with Knurled nut for adjustment. T-316 stainless/ bronze construction.
23-302 35-623 24-302 35-624
1/8" wire 3/16" wire
3/16" pin 1/4" pin
2" adj 2-3/4" adj
Replacement Knurled Nut for above Replacement Knurled Nut for above 35-623/624
Tubular Turnbuckle Eye to Swage - Check Nut Locking
20-304 20-305 20-306 20-308
1/8" wire 5/32" wire 3/16" wire 1/4" wire
3" adj 3" adj 3" adj 4-1/4" adj
Used where an eye is required for attachment instead of a jaw- check nut locking. T-316 stainless.
10
Johnson Marine * Tel 860.873.8697 * Fax 860.873.8589 * www.csjohnson.com
Life Line Fittings - Machine Swage
Swivel, Single Gate Eye
A single eye is used on one end of the gate area to attach the gate hook.
22-311 22-317 22-313
1/8" wire 5/32" wire 3/16" wire
Adjuster-Short
23-303 24-305 35-620 24-303 35-621
Generally used at the stern rail in conjunction with the single gate eye to tension that section of the gate. 1/8" wire 1/4" pin 5/32" wire 1/4" pin 3/16" wire 1/4" pin 1" adj 1" adj 1" adj
Threaded, Single Gate Eye
Knurled Nut for 1/8", 5/32" size Knurled Nut for 3/16" size
Same as above only terminal is threaded into eye nut.
22-301 22-307 22-303 22-305-7 22-305
1/8" wire 5/32" wire 3/16" wire 1/4" wire 1/4" wire 7/32" swage
tain 16 S ll T-3 A
less!
Toggle Jaw, "T" Style
25-314 25-316 25-318-7
Generally used at the stern rail when no gate is required with a turnbuckle forward. 1/8" wire 1/4" pin 3/16" wire 1/4" pin 1/4" wire 5/16" Pin 7/32" swage
Swivel, Interlocking Gate Eye
22-312 22-318 22-314
1/8" wire 5/32" wire 3/16" wire
Toggle Jaw, Old Style
25-304 25-305 25-306 25-308 25-308-7
An interlocking gate eye is used at the opposite end of the gate hook as a "hinge" for the gate.
Same as above only uses toggle nut style instead of "T"bolt style. 1/8" wire 1/4" pin 5/32" wire 1/4" pin 3/16" wire 1/4" pin 1/4" wire 3/8" pin 1/4" wire 5/16" pin 7/32" swage
Threaded, Interlocking Gate Eye
Same as above only terminal is threaded into eye nut.
22-302 22-308 22-304 22-306-7 22-306
1/8" wire 5/32" wire 3/16" wire 1/4" wire 1/4" wire 7/32" swage
Deck Toggle - Old Style
This fitting can be used wherever a cable needs to be terminated to a deck or bulkhead. 3/4" to 1" 25-305-1 5/32" wire "old style"
Eye to Eye Fitting
This fitting can be used wherever an eye is required on each side of the stanchion. 22-100 Adjustable between 3/4" and 1"
Eye to Interlocking Gate Eye Fitting
Deck Toggle `T' Style
Same Deck Toggle only "T" bolt construction. 25-314-1T 25-316-1T 25-318-1T 1/8" wire "T-style" 3/16" wire "T-style" 1/4" wire "T-style"
This fitting can be used wherever an eye is required on one side, and an interlocking eye on the other side of a stanchion.
22-304-100
Adjustable between 3/4" and 1"
Techno*TIP
One of the most neglected parts on a sailboat are the Life Line and Rigging Turnbuckles. Turnbuckles need to be kept free of dirt and salt by rinsing with fresh water periodically. A good marine lubricant like Johnson Sealube or equivalent should be applied to the threads. The lubricant will provide corrosion protection and keep the turnbuckles turning freely. Never straighten a bent threaded stud, always replace it. A bent stud is considerably weakened.
Johnson Marine * Tel 860.873.8697 * Fax 860.873.8589 * www.csjohnson.com
11
