Life Line Fittings - Hand Crimp
Open Body Turnbuckle
Jaw to Hand Crimp Terminal
Classic, traditional design. Forged silicon bronze body with T-316 stainless ends.
Not for lifting, hanging or other high load applications. See page 22 for Rigging Hardware.
26-314 27-316
Chrome Chrome
1/8" wire 1/4" pin 3/16" wire 1/4" pin
3" adj. 3" adj.
Tubular Turnbuckle Jaw to Hand Crimp Terminal - Check Nut Locking
Our most popular life line turnbuckle. Check nut locking. T-316 stainless.
26-412 27-412
1/8" wire 3/16" wire
1/4" pin 1/4" pin
3" adj. 3" adj.
Replacem
Tubular Turnbuckle
Eye to Hand Crimp Turnbuckle - Check Nut Locking
Used where an eye is required for attachment instead of a jaw. Check nut locking. T-316 stainless.
ent Parts on Pages 19 & 20
26-401 27-401
1/8" wire 3/16" wire
3" adj. 3" adj.
Deck Toggle Turnbuckle
Deck Toggle to Hand Crimp Terminal
This "T" bolt style fitting is used on decks or bulkheads. Toggle nut style also available to match old style. T-316 stainless. 26-412-1T 27-412-1T 1/8" wire 3/16" wire 1/4"-28 1/4"-28 3" adj. 3" adj.
"Smooth Line" Turnbuckle
Closed Thread
Very popular architectural turnbuckle also great for life lines. No exposed threads. Cable termination is hidden inside of body and rotates on threaded cap. For details see page 4 of architectural section. T-316 stainless.
26-715 27-715
1/8" wire 3/16" wire
1/4" pin 1/4" pin
2" adj. 2" adj.
Smooth Line Replacement Parts 60-610 60-611 60-619+36-611 60-619 Nose Cone - 1/8" Nose Cone - 3/16" Crimp Sleeve - 1/8" Crimp Sleeve - 3/16"
Adjuster Turnbuckle
Jaw to Hand Crimp Terminal
Stamped, strap design turnbuckle with knurled nut for adjustment. T-316 stainless/ bronze construction.
26-302 27-302 35-624
1/8" wire 3/16" wire
1/4" pin 1/4" pin
2-3/4" adj. 2-3/4" adj.
Replacement Knurled Nut
35-624
Conversion Sleeve
Length 5-1/2"
Double Hand Crimp Terminal Fitting
27-415-5-6 1/8 to 3/16" Hand Crimp
Allows the use of 3/16" life line fittings to be used with 1/8" cable. Slide over cable first then into fitting. 36-611 1/8 to 3/16" Hand Crimp
Used whenever two pieces of cable need to be joined.
16
Johnson Marine * Tel 860.873.8697 * Fax 860.873.8589 * www.csjohnson.com
Life Line Fittings - Hand Crimp
Swivel, Single Gate Eye
A single eye is used on one end of the gate area to attach the gate hook. 1/8" wire # 26-409 27-409 3/16" wire
Adjuster-Short
26-406
Generally used at the stern rail in conjunction with the single gate eye to tension that section of the gate. 1/8" wire 1/4" pin Knurled Nut for 1/8" size 3/16" wire 1/4" pin Knurled Nut for 3/16" size 1" adj. 1" adj.
l Stain -316 All T
ess!
35-620 27-406 35-621
Threaded, Single Gate Eye
# 26-407 27-407
Same as above only terminal is threaded into eye nut. 1/8" wire 3/16" wire
Toggle Jaw, "T" Style
# 26-415
Generally used at the stern rail when no gate is required with a turnbuckle forward. 1/8" wire 1/4" pin 3/16" wire 1/4" pin
Swivel, Interlocking Gate Eye
# 26-410 27-410 1/8" wire 3/16" wire
27-415
An interlocking gate eye is used at the opposite end of the gate hook as a "hinge" for the gate.
Same as above only uses toggle nut style instead of "T" bolt style.
Toggle Jaw, Old Style
26-405 27-405
Threaded, Interlocking Gate Eye
26-408 27-408 1/8" wire 3/16" wire
1/8" wire 1/4" pin 3/16" wire 1/4" pin
Same as above only terminal is threaded into eye nut.
Deck Toggle - Old Style
3/4" to 1"
This fitting can be used wherever a cable needs to be terminated to a deck or bulkhead. 26-405-1 1/8" wire "Old Style"
Eye to Eye Fitting
22-100
This fitting can be used wherever an eye is required on each side of the stanchion. Adjustable between 3/4" and 1"
Deck Toggle - `T' Style
Eye to Interlocking Gate Eye
This fitting can be used wherever an eye is required on one side, and an interlocking eye on the other side of a stanchion.
Same Deck Toggle only "T" bolt construction. # 26-415-1T 27-415-1T 1/8" wire "T-Style 3/16" wire "T-Style
22-304-100
Adjustable between 3/4" and 1"
# Not a true 1/8" terminal (3/16" terminal with sleeve).
Hand Crimp terminals, when properly applied, are approximately 65-70% of 7 x 7 wire strength. While this has proven adequate for life lines, we do not approve use of these fittings for standing rigging or other high load applications. Instructions for attachment (sent with order) must be followed.
Johnson Marine * Tel 860.873.8697 * Fax 860.873.8589 * www.csjohnson.com
17
