Rigging Hardware
Type 316 Stainless Marine Eyes & Fork

MADE IN USA

These new marine and MS style eyes and forks are manufactured by Johnson in the USA on the latest CNC machinery. All fittings are T-316 stainless steel with the quality you expect from Johnson.

Marine Eyes - Machine Swage T-316
CAT. NO.
12-201 12-202 12-203 12-204 12-205 12-206 12-207 12-208 12-209 12-210

WIRE SIZE
3/32" 1/8" 5/32" 3/16" 7/32" 1/4" 9/32" 5/16" 3/8" 7/16"

PIN SIZE
1/4" 1/4" 5/16" 3/8" 7/16" 1/2" 1/2" 5/8" 5/8" 3/4"

THICKNESS
7/32" 7/32" 9/32" 11/32" 13/32" 15/32" 15/32" 19/32" 19/32" 23/32"

SAFE WORKING LOAD
400 lbs. 700 lbs. 1100 lbs. 1600 lbs. 2100 lbs. 2700 lbs. 3500 lbs. 4200 lbs. 5900 lbs. 8000 lbs.

Pins Not Included see pages 34 & 35

MS Style Eyes - Machine Swage T-316
CAT. NO.
12-211 12-212 12-213 12-214 12-215 12-216 12-217 12-218 12-219

WIRE SIZE
3/32" 1/8" 5/32" 3/16" 7/32" 1/4" 9/32" 5/16" 3/8"

PIN SIZE
3/16" 3/16" 1/4" 5/16" 5/16" 3/8" 7/16" 7/16" 1/2"

THICKNESS
1/8" 3/16" 3/16" 1/4" 9/32" 5/16" 5/16" 11/32" 3/8"

SAFE WORKING LOAD
400 lbs. 700 lbs. 1100 lbs. 1600 lbs. 2100 lbs. 2700 lbs. 3500 lbs. 4200 lbs. 5900 lbs.

Pins Not Included see pages 34 & 35

MS Style Fork - Machine Swage T-316
CAT. NO.
12-221 12-222 12-223 12-224 12-225 12-226 12-227 12-228 12-229

WIRE SIZE
3/32" 1/8" 5/32" 3/16" 7/32" 1/4" 9/32" 5/16" 3/8"

PIN SIZE
3/16" 3/16" 1/4" 5/16" 5/16" 3/8" 7/16" 7/16" 1/2"

OPENING
7/64" 3/16" 13/64" 17/64" 19/64" 5/16" 21/64" 23/64" 3/8"

DEPTH FROM PIN CENTER
11/16" 3/4" 13/16" 7/8" 1" 1-5/64" 1-11/64" 1-17/64" 1-35/64"

SAFE WORKING LOAD
400 lbs. 700 lbs. 1100 lbs. 1600 lbs. 2100 lbs. 2700 lbs. 3500 lbs. 4200 lbs. 5900 lbs.

Pins Not Included see pages 34 & 35

Call for OEM and Bulk Pricing!

32

Johnson Marine * Tel 860.873.8697 * Fax 860.873.8589 * www.csjohnson.com

Rigging Hardware
Toggle Jaws for Machine Swage
This fitting's universal toggle action prevents any adverse bending of wire. Pins included.

Toggle Nut Style

"T" Toggle Style

E
F

D C

A
CAT. NO.
17-203 17-204 17-214** 17-205 17-205-2 17-215-2** 17-206 17-216** 17-207 17-208 17-209 17-210 17-211 17-212 17-213

B

WIRE SIZE
3/32" 1/8" 1/8" 5/32" 5/32" 5/32" 3/16" 3/16" 7/32" 1/4" 1/4" 9/32" 5/16" 5/16" 3/8"

A
2-3/4" 3" 2-7/8" 3-1/4" 3-3/4" 4-1/2" 4-1/4" 4-3/4" 4-1/2" 4-3/4" 5-1/4" 5-1/2" 5-3/4" 6-1/2" 7"

B
1-1/2" 1-1/2" 1-5/16" 1-1/2" 2-1/8" 2-5/8" 2-1/4" 2-5/8" 2-1/4" 2-1/4" 2-5/8" 2-7/8" 2-7/8" 3-1/4" 3-1/4"

C
11/16" 11/16" 7/8" 11/16" 1" 1" 7/8" 1" 7/8" 7/8" 1-1/16" 1-1/16" 1-1/16" 1-3/16" 1-5/16"

D
1/4" 1/4" 1/4" 1/4" 5/16" 5/16" 3/8" 5/16" 3/8" 3/8" 1/2" 1/2" 1/2" 5/8" 5/8"

E
1/4" 1/4" 1/4" 1/4" 5/16" 5/16" 3/8" 5/16" 3/8" 3/8" 1/2" 1/2" 1/2" 5/8" 5/8"

F

BEFORE SWAGE DIA. *
.218

AFTER SWAGE DIA. *
.190 .219 .219 .250 .250 .250 .313 .313 .375 .438 .438 .500 .563 .563 .625

SAFE WORKING LOAD
1000 lbs 1000 lbs 1000 lbs 1000 lbs 1600 lbs 1600 lbs 2800 lbs 1600 lbs 2800 lbs 2800 lbs 3500 lbs 3500 lbs 4200 lbs 4200 lbs 5900 lbs

5/8"

.250 .250 .297 .297

3/4"

.297 .359

7/8"

.359 .427 .494 .494

1-1/8"

.563 .635 .635

1-3/8"

.703

** With T-Toggle Jaw *All tolerances are: +.000 - .005 Dimensions shown are inches. NOTE: Before and After swage dimensions are mil spec and conform to both our life line and rigging fittings with regard to all aspects except cable depth in fittings. (See chart on page 52.) The primary difference between life line and rigging fittings is the cable depth, although other factors exist. Always use rigging fittings when in doubt or wherever high load applications exist. Never exceed the safe working load. Johnson Marine * Tel 860.873.8697 * Fax 860.873.8589 * www.csjohnson.com

33