Rigging Hardware
Rigging Toggles
These stainless steel rigging toggles are essential to prevent misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging that was made too short. Ultimate strength exceeds the corresponding clevis pin. All sizes include pins.
Specifications & Data
CAT. NO.
12-120 12-121 12-122 12-126 12-123 12-124 12-125
A
1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4"
B
1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4"
C
.094 .094 .141 .165 .187 1/4" 1/4"
D
5/16" 19/64" 23/64" 27/64" 31/64" 39/64" 47/64"
E
1" 1-1/4" 1-5/8" 1-11/16" 1-7/8" 2-1/4" 2-3/4"
F
5/16" 11/32" 13/32" 15/32" 17/32" 11/16" 13/16"
G
5/8" 5/8" 3/4" 7/8" 1" 1-1/4" 1-1/2"
SAFE WORKING LOAD
1000 lbs 1600 lbs 2800 lbs 3500 lbs 4200 lbs 5900 lbs 9000 lbs
D E
Double Jaw Toggles
Like our Eye Jaw toggles only used to facilitate toggling action when used with marine eyes and mechanical fittings. These toggles are available in 7 sizes from 14"- 3/4" pin sizes. All sizes include pins.
G
F
Specifications & Data
CAT. NO. A B C D E F G SAFE WORKING LOAD
B
C
A
Upper Replacement Washer
320W 321W 322W 326W 323W 324W 325W
Upper Replacement Clevis Pin w/ Cotter
CP-4-20c CP-5-24c CP-6-32c CP-7-40c CP-8-40c CP-10-48c CP-12-48-1c
12-320 12-321 12-322 12-326 12-323 12-324 12-325
1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4"
1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4"
13GA 13GA 10GA 8GA 3/16" 1/4" 1/4"
5/8" 3/4" 1" 1-1/8" 1-1/4" 1-1/2" 1-3/4"
1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4"
1-1/16" 1-1/4" 1-1/12" 1-3/4" 2" 2-1/2" 3"
1/2" 5/8" 3/4" 7/8" 1" 1-1/4" 1-1/2"
1000 lbs 1600 lbs 2800 lbs 3500 lbs 4200 lbs 5900 lbs 9000 lbs
Swivel Jaw
This neat fitting has many applications where a swivel is required. Rugged stainless steel with a breaking strength of over 5,000 lbs.* Pin Diameter 5/16". Pin to Pin 2 1/4". * We recommend a working load of not over 40% of this amount.
Swivel Jaw Cat. No. 100-700
38
Johnson Marine * Tel 860.873.8697 * Fax 860.873.8589 * www.csjohnson.com
Sta-Lock(R) Mechanical Terminals
STA-LOK(R)
STA-LOK terminals; a simple mechanical method of terminating wire ropes. They offer a range of high quality, high performance fittings for 1 x 19, 7 x 7, 7 x 19 and Dyform wire ropes. The STA-LOK terminal produces 100% of the rated breaking strength of the wire rope and is approved by Lloyds Register of Shipping. All terminals are manufactured from polished T-316 stainless steel and are reusable (with new wedge). Please note: Price includes the former and wedge. Each order must specify cable construction.
STUD TERMINALS: RH UNF CAT. NO. SL-S-4 SL-S-5 SL-S-6 SL-S-6B SL-S-7 SL-S-8 SL-S-8B SL-S-9 SL-S-10 SL-S-12 WIRE SIZE THREAD SIZE 1/4" 5/16" 5/16" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 5/8" THREAD LGTH 1/8" 5/32" 3/16" 3/16" 7/32" 1/4" 1/4" 9/32" 5/16" 3/8" 2-1/32" 2-1/32" 2-1/8" 2-5/8" 2-5/8" 2-5/8" 3-1/4" 3-1/4" 3-1/4" 3-3/4" EYE TERMINALS CAT. NO. SL-E-4 SL-E-5 SL-E-6 SL-E-7 SL-E-8 SL-E-8B SL-E-9 SL-E-10 SL-E-12 WIRE SIZE 1/8" 5/32" 3/16" 7/32" 1/4" 1/4" 9/32" 5/16" 3/8" PIN SIZE 1/4" 5/16" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 5/8" FORK TERMINALS CAT. NO. SL-F-4 SL-F-5 SL-F-6 SL-F-7 SL-F-8 SL-F-9 SL-F-10 SL-F-12
Stud Terminal
Fork Terminal
Eye Terminal
WIRE SIZE 1/8" 5/32" 3/16" 7/32" 1/4" 9/32" 5/16" 3/8"
INSIDE W. 39/64" 1/4" 5/16" 3/8" 3/8" 27/67" 55/64" 55/64"
PIN SIZE 1/4" 1/4" 5/16" 7/16" 7/16" 7/16" 1/2" 5/8"
Larger sizes available - please inquire 1/8" & 7/32" sizes will not work on 7x cables
Larger sizes available - please inquire 1/8" & 7/32" sizes will not work on 7x cables
Larger sizes available - please inquire 1/8" & 7/32" sizes will not work on 7x cables
BACKSTAY INSULATORS For 1x19 Cable Only CAT. NO. SL-BI-7 SL-BI-8 WIRE SIZE 7/32" 1/4" 9/32" 5/16" 3/8" BREAK STRENGTH 9000 lbs. 9000 lbs. 15000 lbs. 15000 lbs. 219000 lbs. 7-1/2" 7-1/2" 8" 8" 9" LGTH
Backstay Insulator
SL-BI-9 SL-BI-10
Installation Instructions
SL-BI-1
Larger sizes available - please inquire
Johnson Marine * Tel 860.873.8697 * Fax 860.873.8589 * www.csjohnson.com
39
