Folding Cleats and Shroud Cleats
Toe Rail Folding Cleat

The toe rail folding cleat makes a perfect movable, mid-ship cleat for spring lines, etc. This cleat is mountable on all aluminum toe rails. The rail is protected by a silicon rubber pad for rattle free installation. The cleat folds out of the way when not in use, the husky 3/8" dia. cleat assures strength. The complete unit is T-316 stainless. Fits most symmetric and asymmetric aluminum toe rails. Safe Working Load = 2000 lbs.
Patent #DES.401,842
Toe Rail Folding Cleat Cat. No. 48-510

1 1/4" Track Mounted Folding Cleat

Our husky 3/8" dia. folding cleat is now available mounted on a sliding stainless steel car for 1 1/4" track. The folding cleat is 8" long and features a knurled screw pin for adjustment along the track. The track surface is protected with a teflon/fiber strip. The entire unit is made from T-316 stainless steel.
Safe Working Load = 2000 lbs.
Track Mounted Folding Cleat

Patent #DES.401,842
Cat. No. 48-511

Neat Cleat

An exceptionally strong and functional folding cleat. A friction drag insures that the cleat will stay either up or down as required. The open construction not only allows a conventional hitch but dock lines with a loop may be passed through with a "bite" around the ears. Halyards, guys and sheets may be snapped on even when the cleat is in use. This 8" cleat will handle up to 5/8" lines. Use four (4) 5/16" bolts to fasten. (Not
supplied)

Shroud Cleat

Safe Working Load = 2000 lbs.
Neat Cleat Cat. No. 48-508

All stainless steel construction, compatible with your stainless steel rigging. Will not corrode. The JOHNSON SHROUD CLEAT is easily attached to 5/32" thru 3/8" dia. wire or rod. Ideal for flag, radar reflector and steaming shape halyards with an eye for attaching a snap shackle. Low profile, projects only 1/2" from shroud.
Shroud Cleat Cat. No. 40-518

44

Johnson Marine * Tel 860.873.8697 * Fax 860.873.8589 * www.csjohnson.com

Folding Pad Eyes
Toe Rail Mounted Folding Bail

We are now offering a triangular bail, mounted on our toe rail bracket for attaching snatch blocks, snap shackles or lines. The bail is a husky 3/8" dia. Entire unit is T-316 stainless steel, silicon pads protect rail and provide friction drag assuring a rattle free installation.
Safe Working Load = 2000 lbs.
Toe Rail Mounted Folding Bail Cat. No. 48-526

5/16" Size Hinged Pad Eye

Our new pad eye resembles our smaller (1/4") version only larger in size. This fitting will fasten with three (3) 5/16" bolts (not supplied). The unit features a friction drag for a rattle free installation, all T-316 stainless steel. Supplied with backing plate.
5/16" Hinged Pad Eye Cat. No. 48-585

1/4" Hinged Pad Eye
5/16" Hinged Pad Eye

This pad eye folds flat when not in use. The eye gives with the load unlike rigid pad eyes; materially reducing the load on the fastenings. A friction drag insures that the eye stays in position and is rattle free. Now supplied with backing plate. Fastens with (3) 1/4" bolts (not supplied).
1/4" Hinged Pad Eye w/ Backing Plate Backing Plate Cat. No. 48-580 Cat. No. 48-582

1/4" Hinged Pad Eye

Mini 3/16" Hinged Pad Eye

This pad eye is a smaller version of our popular #48-580 hinged pad eye. This unit is suitable for awning and many other tie down applications. Working load should not exceed 400 lbs.. Material is all T-316 stainless. Fastens with (2) 1/4" bolts (not supplied).
3/16" Hinged Pad Eye Cat. No. 48-570

3/16" Hinged Pad Eye

5/16" Hinged Pad Eye
Safe Working Load: 1500 lbs

1/4" Hinged Pad Eye
Safe Working Load: 1000 lbs

3/16" Hinged Pad Eye
Safe Working Load: 400 lbs

Johnson Marine * Tel 860.873.8697 * Fax 860.873.8589 * www.csjohnson.com

45