Accessories
Flag Halyard Kits
Backstay Flag Halyard Kit Everything you need to rig a backstay flag halyard. 40 ft. of 3/16" polyester line, block with wire rope clamp, cleat with wire rope clamp and (2) bronze snaps. Easily attaches to 5/32" thru 3/8" Dia. wire or rod.
Backstay Halyard Kit Cat. No. 40-529
Spreader Halyard Kit Includes 40 ft. of polyester line, block with bail and shroud cleat.
Spreader Halyard Kit Cat. No. 40-530
Tuna Tower Halyard Kit Includes 40 ft. of polyester line, block with rail mount, cleat with rail mount and (2) bronze snaps. Will accommodate tower tube diameter 7/8" and 1".
Tuna Tower Halyard Kit Cat. No. 40-531
Spinnaker Pole Stanchion Mount
This set of spinnaker pole holders makes storage and quick retrieval simple. One end of the pole is slid through the vinyl coated wire loop of the aft holder, the end fitting of the opposite end is securely snapped on the bail of the forward holder. Price includes the set as shown.
For Pole Dia. 2" & 2-1/2" For Pole Dia. 3" For Pole Dia. 3-1/2" Cat. No. 40-556 Cat. No. 40-557 Cat. No. 40-558
Sealube - Turnbuckle Lubricant
Space age synthetic lubricant especially formulated for turnbuckles or any high bearing load, low speed application. Will carry higher bearing loads than any other lubricant. Provides powerful resistance to corrosion of the host metal. Water resistant and long lasting.
1 oz. bottle Case/24 bottles Cat. No. 48-540 Cat. No. 48-541
Halyard J Hook
The JOHNSON J HOOK is a simple and effective solution to halyard drumming without the nuisance of tying off. Just walk to the rail and engage halyard with the J HOOK, cleat and it's done. No sharp or rough edges on this stainless steel fitting Locate as pictured below to catch sails. Install a pair for main and jib halyards. Each J HOOK will accept several halyards. Weight only 2 oz.
Halyard J Hook Halyard J Hook Pair Cat. No. 40-527 Cat. No. 40-528
Fasten with #10 screws or rivets
48
Johnson Marine * Tel 860.873.8697 * Fax 860.873.8589 * www.csjohnson.com
Accessories
Fend-R-Clip
Simple, efficient stainless steel fender hanger. Clips to 7/8" or 1" rails. Adjust by lifting tail and when released it automatically jams.
Fend-R-Clip Cat. No. 40-515
Line Caddy
There are many devices to aid the organizing of lines, particularly sheets and guys, none is as neat and handy as this fitting from Johnson. LINE CADDY may be mounted in the lazarette or on a bulkhead. They will "grab" a line up to 3/4" Dia. and hold it securely and yet hold and release are instantaneous. No fumbling with snaps or retainers. Made from #18-8 stainless spring steel.
Line Caddy Cat. No. 40-514
High-End Polypropylene Netting - not just for life lines.
* * * * (HTPP) High Tenacity Polypropylene 3mm, 2" x 2" square woven mesh. Bordered top and bottom. Custom size nets available up to 24' wide. Available in White, Black, Blue, Yellow, Sand and Green.
Other uses include: * Wherever quality, high strength netting is required. * Interior bunk cargo netting. * Lazzarette netting.
Available on custom order. Please allow 2-3 weeks for delivery.
Sole Mate - Ladder Treads
Comfortable foot pads easily installed on your stern swim ladder. No cutting, drilling or fitting. Made of no maintenance ABS plastic in a wood tone with stainless steel mounting hardware.
Install in pairs on each step or alternately. For welded ladders made of 1" diameter tubing only. 5" long.
Ladder Tread Ladder Tread Pair Cat. No. 48-560 Cat. No. 48-561
Johnson Marine * Tel 860.873.8697 * Fax 860.873.8589 * www.csjohnson.com
49
