Life Line Fittings - Hand Crimp

Swivel, Single Gate Eye

A single eye is used on one end of the gate area to attach the gate hook. 1/8" wire # 26-409 27-409 3/16" wire

Adjuster-Short
26-406

Generally used at the stern rail in conjunction with the single gate eye to tension that section of the gate. 1/8" wire 1/4" pin Knurled Nut for 1/8" size 3/16" wire 1/4" pin Knurled Nut for 3/16" size 1" adj. 1" adj.

l Stain -316 All T

ess!

35-620 27-406 35-621

Threaded, Single Gate Eye
# 26-407 27-407

Same as above only terminal is threaded into eye nut. 1/8" wire 3/16" wire

Toggle Jaw, "T" Style
# 26-415

Generally used at the stern rail when no gate is required with a turnbuckle forward. 1/8" wire 1/4" pin 3/16" wire 1/4" pin

Swivel, Interlocking Gate Eye
# 26-410 27-410 1/8" wire 3/16" wire

27-415

An interlocking gate eye is used at the opposite end of the gate hook as a "hinge" for the gate.

Same as above only uses toggle nut style instead of "T" bolt style.

Toggle Jaw, Old Style
26-405 27-405

Threaded, Interlocking Gate Eye
26-408 27-408 1/8" wire 3/16" wire

1/8" wire 1/4" pin 3/16" wire 1/4" pin

Same as above only terminal is threaded into eye nut.

Deck Toggle - Old Style

3/4" to 1"

This fitting can be used wherever a cable needs to be terminated to a deck or bulkhead. 26-405-1 1/8" wire "Old Style"

Eye to Eye Fitting
22-100

This fitting can be used wherever an eye is required on each side of the stanchion. Adjustable between 3/4" and 1"

Deck Toggle - `T' Style

Eye to Interlocking Gate Eye

This fitting can be used wherever an eye is required on one side, and an interlocking eye on the other side of a stanchion.

Same Deck Toggle only "T" bolt construction. # 26-415-1T 27-415-1T 1/8" wire "T-Style 3/16" wire "T-Style

22-304-100

Adjustable between 3/4" and 1"

# Not a true 1/8" terminal (3/16" terminal with sleeve).

Hand Crimp terminals, when properly applied, are approximately 65-70% of 7 x 7 wire strength. While this has proven adequate for life lines, we do not approve use of these fittings for standing rigging or other high load applications. Instructions for attachment (sent with order) must be followed.

Johnson Marine * Tel 860.873.8697 * Fax 860.873.8589 * www.csjohnson.com

17