Miscellaneous Life Line Fittings - Hand Crimp
Diamond Pad Eye
1/4" Bail

Stanchion Eye
1" Stanchion

Pulpit Anchor
1" Rail

1-1/2"

2-5/8"
This pad eye can be used on deck for life lines or other applications. 750 lbs safe working load. See our hinged pad eyes on page 45. Diamond Pad Eye Cat. No. 28-501

This fitting is used on a stanchion for adding lower life lines without the need to drill holes for the cable to pass through. (5/16" hole).

Can be used on the stern rail and bow pulpit to terminated jaw fittings for lower (or upper) life lines. (1/2" hole).

Stanchion Eye

Cat. No. 29-502

Pulpit Anchor

Cat. No. 29-501

Gate Stop Eye to Deck Toggle Fitting
This fitting can be mounted to any flat surface and accept life line fittings, line, etc. Toggling action is 140 degrees.

These collars can be used at the gate instead of interlocking eyes, they maintain tension while the gate is open. A set-screw holds them in place.

29-503 Eye to Deck Toggle Cat. No. LS-2550 29-504 29-505 29-506

3/16" max coating 1/4" max coating 5/16" max coating 3/8" max coating

Eye to Jaw Fitting

This fitting will convert a small bail at the stern rail to our standard gate eye to accept our Over Center Gate Hook. Eye to Jaw Cat. No. LS-2500

Conversion Sleeve

Allows the use of 3/16" life line fittings to be used with 1/8" cable. Slide over cable first then into fitting. 36-611 1/8 to 3/16" Hand Crimp

26 & 27 Series "Shortie" Turnbuckle

All 1/4-28 (unslotted) body life line turnbuckles are available in a new shorter length. Body length is 3" for 2" of total adjustment. Add "S" to std. cat. no., same price.

Regular

Stanchion Terminal
"Shortie"

Used where the cable needs to be terminated at the stanchion. 26-405-5F 27-405-5F 1/8" wire 3/16" wire

18

Johnson Marine * Tel 860.873.8697 * Fax 860.873.8589 * www.csjohnson.com